Eaton Logo

Can I replace the pigtail shunt connector on a model 988 contactor?

Yes, the P/N of the pigtail shunt connector is 25-11059.
NOTE: The previous design lever 24-4809-2 used  a brazed connection to the moving contact lever. If the moving contact lever has the brazed  connection,  a complete current revision 24-4809-2 contact lever using bolted connection must be ordered. Once the lever is updated to the current design, the shunt connector can be replaced without changing the complete contact lever. See attached sketch 71-753.

  1. 71-753 Rev A.pdf