Eaton Logo

How do I program the S811+ Relay Custom Configuration

The S811+ enables custom configuration of the two (2) relays. This can be done from the Digital Interface Module (DIM) and navigating to the Relay Config parameter located in the Advanced I/O Menu. The following configurations are available:

0 = No Function

1 = Fault

2 = Fault NOT

3 = Bypassed

4 = Bypassed NOT

5 = Motor Energized

6 = Motor Energized NOT

7 = Warning

8 = Warning NOT

9 = Custom Codes*

10 = Custom Codes NOT*

 

* Please note that the Custom Codes and Custom Codes NOT option is referred to as Custom Flt/Warn in the S811+ User Manual