Replacement Rocker Switch
If you have equipment that utilizes an Eaton rocker switch, and that rocker needs replacement, then the optimal solution is to contact the manufacturer of the equipment that the rocker is installed in, or their dealers, for parts.
If that manufacturer is no longer providing aftermarket support for your equipment then you may be able to find a replacement from one of our stocking distributors online, but this will require several steps as follows: Open our Rocker Switch Catalog. The first few pages have pictures and dimensions that you can use to identify which line of rockers yours belongs to. Once you have identified a line, proceed to the catalog number selection pages for that specific line. The catalog number selection breakdown will show you what information is required in order to build a part number. Our US Distributor Stock Check will allow you to search for the part number you've generated. Very often, the part number that you generate may not be something that is stocked by our distributors, but they may stock something similar. Running the search for an incomplete part number can help you find those similar parts.
For technical inquiries (assistance with product selection, product identification, wiring, etc.): Send a detailed email to vctechsupport@eaton.com. If you need help identifying and replacing your existing rocker, include pictures of it from the front, side and rear, and identify the make of the machine the rocker was installed in if possible.
For commercial inquiries (P&A for distributors, order entry assistance, etc): If you are an authorized distributor wanting to purchase large amounts of rockers from Eaton, you can contact orderentryvcbu@eaton.com or call 866-309-9640.
