Eaton Logo

A200 Contactors and Starters Selection

In order to properly size a A200/A201 contactor/starter, you will need to get the following information:

  • Motor Voltage and HP
  • Coil Voltage
  • Motor Nameplate FLA (for sizing overload)

Per NEMA, contactors for motor control should be selected by HP and voltage, while overloads should be sized based on the motor nameplate FLA.

With this information, products can be selected using the tables in the catalog -> NEMA Contactors and Starters 

Direct Links to Individual Catalog Sections 

For more information, see our A200 Product Overview