Eaton Logo

HMX (H-Max) Return to Factory Settings

For an HMX, to return the drive to factory settings, follow the steps below.

Steps:

  1. Apply power to drive
  2. Navigate to the Main Menu. For a HMX, the Main Menu is found by pressing the ◄ (left arrow) for 2 seconds from the default page (Operate Menu).
  3. Select User Settings and press OK. Use the ▲(up arrow) and ▼(down) to change menu selected item. 
  4. Select Parameter Backup and press OK
  5. Select Restore Factory Defaults and press OK.

You will need to confirm defaulting the drive. After this the HMX will reboot and prompt the user with the Startup Wizard